YOU WILL NEED
* Woodoc 30 Clear
* Woodoc Colours in Orange and Full Moon
* sandpaper (80- and 100-grit)
* cloth
* paintbrush
* steel wool
* mineral turpentine
STEPS
STEP 1
Use the sandpaper to lightly sand the cane surface.
STEP 2
Make sure the surface is dry and dust-free.
STEP 3
Add the Woodoc Colours to the Woodoc 30 Clear and stir well.
STEP 4
Apply the first coat of the tinted Woodoc 30 to the cane until the surface remains glossy for 10 minutes. Allow it to dry completely.
STEP 5
Sand lightly with steel wool. Remove the dust with a clean, dry cloth. Then wipe with mineral turpentine. Apply two more coats in the same way. Do not sand after the third coat.
