You will need
• 22mm x 44mm planedpine, cut to:
- eight 175mm lengths (cut one end at a 45° angle)
- four 350mm lengths (cut both ends at a 45° angle)
• 6mm x 40mm chipboard screws
• Alcolin Fast Set Wood Glue
• Alcolin Woodfiller
• 120-grit sandpaper
How to
1 Using the Alcolin Fast Set Wood Glue, glue and then screw the 350mm piece between two175mm pieces (angled corners against each other) to form a U-shape. Repeat the process to makethree more U-shapes.
2 Glue and screw the four U-shapes to each other in a clockwise direction(see photo 2). Fill in the screw holes with woodfiller; allow to dry completely and sand thoroughly.
